Knowledgebase
Knowledgebase
Replacing Drives in OpenMediaVault
Posted by J Mitchell on 25 January 2018 09:40 AM

Add Drives to Degraded Raid array in Open media vault

 

Check status of Array -

mdadm -D /dev/md0

 

Remove any failed drives (if already removed move to next step) -

sudo mdadm --remove /dev/md0 /dev/sda <-(Make sure SDA is change to represent drive you wish to remove)

 

Add New drive to array -

sudo mdadm --add /dev/md0 /dev/sda <-(Make sure SDA is change to represent drive you wish to add)

 

Run first command again to check that array has begun rebuilding array.

(0 vote(s))
Helpful
Not helpful

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments: